ACTUATORS AVC WITH MIXING VALVES

AVC actuators are intended for the control of rotary mixing and ball valves.

SIGNALISATION OF OPERATION

The signalisation of operation with LEDs on the actuator shows the direction in which the mixing valve is moving. The user always has an overview whether the actuator is stationary or moving.

MANUAL MODE CLUTCH

When the button is in the position, the actuator operates automatically.
When the button is in the position, the valve position can be set with a button or the manual turning lever.

FOUR POSSIBLE INSTALLATION POSITIONS

The AVC actuator can be installed on the mixing valve in four positions (upper, lower, left, right).

DIRECT INSTALLATION ON MORE THAN 20 DIFFERENT VALVES

The actuators are available with suitable accessories, which enable direct installation to more than 20 mixing valves of different manufacturers.

APPLICATIONAVC + mixing valve 3 WAVC +
mixing valve 4 W
In various heating or cooling systems  
Switchover from a solid fuel boiler to an oil boiler 
Switchover from a solid fuel boiler to a gas boiler 
Switchover of the storage tank to an oil boiler 
Switchover of the storage tank to a gas boiler 
Switchover between a solid fuel boiler and a solar system (domestic hot water heating) 
Switchover of the heat pump and the solar system (domestic hot water heating) 
Switchover between heating and domestic hot water heating 
Switchover of the collectors east/west 
Switchover of the domestic hot water storage tank to the storage tank (solar system) 
Switchover of the domestic hot water storage tank to the pool (solar system) 
Switchover between two heat exchangers