Technical specifications Tehnični_list_AVC__mešalni_ventil_EN.pdf
Photo AVCmešalni_ventil.tif

Presentation

Set of actuator AVC and 3 W mixing valve are used to regulate heating or cooling circuits and switching between heating sources.

 

Application

  • Switchover from a solid fuel boiler to an oil boiler.
  • Switchover from a solid fuel boiler to a gas boiler.
  • Switchover of the reservoir to an oil boiler.
  • Switchover of the reservoir to a gas boiler.
  • Switchover between a solid fuel boiler and solar system (hot water preparation).
  • Switchover of a heat pump and solar system (hot water preparation).
  • Switchover between heating and the preparation of hot water.
  • Switchover of the collectors east/west.
  • Switchover of the hot water heater to the reservoir (solar system).
  • Switchover of the hot water heater to the pool (solar system).
  • Switchover between two heat exchangers.

Advantages

  • Minimum resistance or flow reduction.
  • Suitable for use in residential and commercial systems.
  • Suitable for use in the heating system as well as in the systems for hot water.
  • Very easy and quick installation.
  • Indicator of the rotation direction.
  • Display of the valve position.
  • Fitted permanent coupling for manual operation.
  • In the case of a blocked valve, the motor drive is not damaged.

APPLICATIONAVC + mixing valve 3 PAVC +
mixing valve 4P
For controlling various heating systems for heating and cooling  
For controlling ventilation systems  
Switchover from a solid fuel boiler to an oil boiler 
Switchover from a solid fuel boiler to a gas boiler 
Switchover of the reservoir to an oil boiler 
Switchover of the reservoir to a gas boiler 
Switchover between a solid fuel boiler and solar system (hot water preparation) 
Switchover of a heat pump and solar system (hot water preparation) 
Switchover between heating and the preparation of hot water 
Switchover of the collectors east/west 
Switchover of the hot water heater to the reservoir (solar system) 
Switchover of the hot water heater to the pool (solar system) 
Switchover between two heat exchangers 

TECHNICAL SPECIFICATIONSAVC with mixing valve + 3P
Mains voltage230V ~ or 24V ~
Own consumption230 ~ V own consumption 2.5VA
24 ~ V own consumption 4VA
Additional pump off switch250 VAC, 3 A
Protection gradeIP 42
Protection classII for 230VAC voltage
III 24VAC voltage
Designed under the Low Voltage Directive (LVD) 2006/95/ECyes
Designed under the Electromagnetic Compatibility (EMC) Directive 2004/108/ECyes
Designed under the RoHS Directive on hazardous substances in electrical and electronic equipment 2002/95/ECyes
Standards usedEN 60730-1
EN 60730-2-14
Housing materialPC – dark grey
Standard cable length2 m
Operating temperature0 ÷ 50 °C
Storage temperature-20 °C to +75 °C
Weight 390 g - 860 g
Engine dimensions with button (W×H×D): 101×84×88 (96)mm
Operation mode3P
Maximum operating pressure (bar)10
Maximum operating temperature (°C)110
Rotation angle (°)90
Bodybrass
Spindlebrass
Coverbrass
Valve seatbrass
DrivesStandard fittings suitable for all drives

  Article - Nr. Products
7AVC053V3342-030 7AVC053V3342-030 Actuator AVC05, 2 min, 230 V~ + 3 P mixing valve Ms, Rp 3/4, KV 6,3
7AVC053V3013-030 7AVC053V3013-030 Actuator AVC05, 2 min, 230 V~ + 3 P mixing valve Ms, Rp 1, KV 8
7AVC053V3544-030 7AVC053V3544-030 Actuator AVC05, 2 min, 230 V~ + 3 P mixing valve Ms, Rp 5/4, KV 12
1ASCAVMSA000+NN0 1ASCAVMSA000+NN0 Installation set for 5Nm Esbe, Seltron, Somatherm, Acaso, IVAR, WIP, PAW, BRV, IMIT, Hora, Barberi, Olymp, Hoval
1ASCAVMSB000+NN0 1ASCAVMSB000+NN0 Installation set for 10Nm+ Esbe, Seltron, Somatherm, Acaso, IVAR, WIP, PAW, BRV, IMIT, Hora, Barberi, Olymp, Hoval
1ASCAVMSH000+NN0 1ASCAVMSH000+NN0 Installation set for 5 Nm FIRŠT